海角官方首页

Many plants can be reproduced from cuttings, or pieces, of the parent plant. This allows the gardener to produce a flowering plant faster than from seed. It also helps maintain certain characteristics of the parent plant, like flower color or growth habit, that might change if propagated by seed.

Plant propagation is the creation of new plants from existing ones. Plants can be propagated by two main methods, including sexual (seed) and asexual (vegetative) propagation. Asexual, or vegetative propagation, is done by inducing root formation on a piece of the parent plant so that a new and independent plant is created. The vegetative plant part is placed under conditions favorable for rooting. The plant part must develop its own roots to allow for water and mineral uptake.

In most cases, vegetative propagation produces a clone which is genetically and physically identical to the parent plant. The offspring is identical to the parent because there is no mixing of the gene pools as in seed propagation. For some plants, vegetative propagation is the only way to maintain the characteristics unique to the plant, such as variegation or dwarfing.

Vegetative propagation is advantageous for multiple reasons. Unique characteristics that would not continue through seed propagation, such as color variegation or contorted growth, can be preserved through vegetative propagation. New plant forms can be introduced to the market more quickly through vegetative propagation than through sexual propagation. A larger plant can be obtained in a shorter period of time, and new plants will flower faster than seed-propagated plants. Very little tissue from the parent plant is needed to produce many plants. In cases of declining specimens or historic plants, plant lineage can be maintained by  vegetatively propagating replicas that have the vigor  of young plants.

Before propagating plants, gardeners must confirm that they have permission to propagate them. Many plants are patented and it is unlawful to propagate them for any reason, including personal use! A patent is granted on intellectual property and prohibits anyone else but the patent owner from profiting. To find out if a plant is patented, check the U.S. Patent and Trademark Office website (). While the USPTO is considering whether to grant a patent, a cultivar is sold as “PPAF,” which stands for “plant patent applied for” (e.g., Hemerocallis ‘Inkheart’ PPAF). This status also prohibits propagation by anyone except licensed growers.

Growing Plants From Cuttings

Some plants can be reproduced by cutting propagation. Cutting is a general term used in vegetative propagation and can be any portion of the vegetative plant body used to create new plants. In most plants, the areas that contain meristems (growing points) have to be included in the cutting. The meristems are found at the shoot tip, the tips of side branches (usually at a node, the point on the stem where the leaves are attached), and the root tips.

Propagation by cuttings relies on a plant’s ability to form adventitious shoots or roots. These shoots and roots are wound-induced or preformed and occur in places where they were not originally found, such as at a node or the base of a leaf. Wounding induces hormones to form in the cutting at the wound site. These hormones in turn cause cells to proliferate and form a dense mass of tissue called a callus. Adventitious roots form from calluses.

Both herbaceous and woody plants can be propagated vegetatively by cuttings. It is important to use the correct type of cutting for the plant you are trying to propagate.

Shoot Cuttings

Shoot cuttings may be made from branch tips or stems (Figures 1A and 1B). They also may be made from tip cuttings, which consist of the apical bud and the first one or two nodes on the stem, or they may be made from a stem section containing a single node or several nodes. Remove the lowermost leaves, as they tend to rot once under the soil line. Some people remove the smallest, most tender leaves along with the tip, because they tend to lose water very quickly and wilt. This practice may be used with plants with tender young growth. When taking stem cuttings, include at least two nodes, as the lower node should be beneath the soil surface. Any flower or seed heads also should be removed, as they divert the plant’s energy to themselves and away from the process of making roots. This method of propagation is very popular for herbaceous plants with stems that have an apical bud from which the plant grows.

Figure 1A. Example of shoot cuttings made from branch tips. 

Figure 1B. Example of shoot cuttings made from stems.

Leaf Cuttings

Some plants can be propagated from leaf cuttings (Figure 1C), such as begonia, African violets, and many succulents, such as jade plant and Christmas cactus. The ability of plants to propagate via leaf cuttings is related to the presence of adventitious buds in their leaves. Not all plants have these small, dormant, meristematic areas in their leaves. Under favorable conditions, the adventitious buds within the tissues of the leaf “awaken” and prompt development of an entire miniature plant. Leaf cuttings from succulent plants and those with a multitude of epidermal hairs generally do not need misting to form roots. In fact, they tend to rot if placed under excessive moisture.

Figure 1C. Examples of shoot cuttings made from leaves.

Root Cuttings

Some plants are propagated from sections of root that have the ability to generate adventitious buds and shoots. The cutting is literally a section of root placed in rooting media or a propagation bed. This propagation method is less common.

Timing

While most herbaceous plants can be propagated at any time of the year, timing is critical for the success of woody ornamental propagation from cuttings. Woody plants have different types of shoot cuttings, depending on the season. Cuttings for woody plants are termed softwood, semi-hardwood, and hardwood, depending upon the time of year when plant material is collected.

Softwood cuttings are taken early in the growing season. Softwood is the emerging shoots of shrubs, trees, and evergreens. The wood is still green and easily bruised with a fingernail. This tissue is often too tender and succulent, and will not propagate well for all species. These cuttings root faster compared to other types, but need to be kept cool and moist during collection. Once cut, these soft shoots will lose water quickly. Softwood cuttings that are excessively wilted during collection likely will not root. Examples of woody plants that can be propagated by softwood cuttings are beautyberry, crape myrtle, and butterfly bush.

Semi-hardwood, or greenwood, cuttings are taken later in the growing season. The best time to take semi-hardwood cuttings is in summer, from June to September. The growth flush is completed, the wood is firm, and leaves are mature. If working with larger branches, use only the semi-hardwood cuttings. This category applies to broadleaf evergreens, such as those in genera Rhododendron, Photinia, Ilex, Magnolia, and Camellia.

Hardwood cuttings are taken later in the dormant season. This category applies to deciduous, broadleaf, and needle evergreens. Generally, last season’s growth is collected during the fall and winter.

Following the recommendations in Table 1 can increase the success of propagating new plants. When choosing to create new plants vegetatively, gardeners must determine the best method for the particular plant being reproduced. Many resources, such as those included in the Resources section of this publication, will provide these plant-specific recommendations and guidance. The directions may include multiple methods of propagation for some species, while other species may have only one propagation method.

Table 1. Examples of Species-Specific Propagation Information.

Note. Do not propagate patented, PPAF, or trademarked plants. From The reference manual of woody plant propagation: From seed to tissue culture, by M. Dirr and C. Heuser, 2006. Copyright 2006 by Timber Press.

Tools And Supplies

To propagate plants, some basic tools are necessary. They do not have to be expensive or of commercial grade to be effective.

Stock Plant

A healthy plant is essential for plant propagation. It should be free of insects and disease and be in a state of good nutrition. Though unhealthy plants can be propagated in an effort to save them, they likely will take longer to form roots and recover, and they are more likely to die during the propagation process.

Tools to Cut or Sever

The tools used to cut or sever propagules (the cutting that propgates the plant) will depend upon the type of cutting being made or the plant material being used (Figure 2). Simple scissors or needle-nosed floral snips may be used to collect herbaceous tip and leaf cuttings, while pruning shears and loppers may be necessary for softwood or hardwood cuttings. Inexpensive paring knives or grafting knives also can be used to collect softwood or herbaceous cuttings. It is important to keep tools as sharp as possible to ensure good cuts.

Figure 2. Propagation tools include knives, scissors, and pruning shears.

Media

Propagation media needs to be sterile, fine-textured, weed-free, and without fertilizer to give young plants the best chance for success (Figure 3). Weeds compete with the germinating seedlings for water and nutrients, and disease organisms can kill seedlings in the early stages of germination. Fertilizers can dehydrate embryos or plant tissues. 

Figure 3. Propagation media.

There are several choices for propagation media. The easiest option is to purchase a bag of premixed propagation media without fertilizer. These media provide air/water relationships of 25% to 40% air space and are suitable for plant propagation. Alternatively, materials can be purchased separately and mixed together to create a media that has good moisture-holding capacity and good drainage.

Sand should be sterile; use sharp builder’s sand with a particle diameter of 0.5 to 2 mm. Sand has no buffering capacity; its pH varies with source and can change with the water being applied to the plant. Sand contains no nutrients and has no water-holding capacity. It is suitable when mixed with peat, perlite, and other components.

Perlite is a crushed aluminum-silica volcanic rock that is heated rapidly to 1800 °F. It is sterile, lightweight and chemically inert. Perlite contains no nutrients, has low water-holding capacity, and a pH of 7 to 7.5. For propagation, use horticultural grade #2. Similar to perlite, scoria is a naturally occurring volcanic rock, crushed and screened for size. Pumice is a white, natural volcanic glass. Both have similar qualities to perlite.

Vermiculite is a clay mi